|
Welcome to
|
|
|
|
|
Oak Heat Grilles & Wood Registers
We will try to make purchasing wood floor vents, heat grilles, oak vents, grates or wood registers easy. A "Register" is basically a grille with a damper attached to control air flow from a forced air or heat system. Usually the actual metal register is mounted in the sub floor and covered by sometimes decorative vents, but we can order any stock size wood grille with an attached metal damper. Original wide louver wood vents and baseboard vents do not have the attached damper as an option. Most manufacturers make their wood registers & wood vents quite different and here is how. Some grilles are made out of a flat wood board (oak, maple, whatever species) and the louvers are either cut, drilled, or routered out of this single piece. Mostly strait cuts but some do angle the louvers. You should finish these very well to prevent warping splitting & checking. Another way is a grille or grate that is not 1 piece of wood. These vents are also well made but different in that the frame is 4 pieces and all the louvers are individually hand assembled and glued. This style may reflect a slight cost difference as you shop. And of course for all those of you where everything in your house seems to be "custom", we do that too. Any wood grill, grate or vent can be made to your specifications. Call 1-800-685-8263 or e-mail us at volkosupply@yahoo.com All our wood vents can shipped sanded and clean; ready for on-site finishing or choose a factory finish. Click the basevents wood heat grille & cold air return links below to see specifications and sizes. Can be made custom to any heating duct opening. Click for...Happy People Comments....
Looking for 4" x 8" wood floor vents?... We got em'
Check out all our basevents at : www.basevents.com
Click... Help me size a wood vent
Read about HVAC air ventilation duct cleaning We can produce many custom order wood vents. Variations include one directional vents for stairwell lighting, wall air returns, and entertainment center speaker faces. Modified egg-crate vents have been used in window seats and as light diffusers in ceilings. Pre-finishing is also available as special order work. Use your imagination and use your FAX, or call to see how we can accommodate your needs.
Don't see a size you are looking for call or e-mail us Does "custom" sound expensive? Be surprised. Call for a quote @ 1 800 685 8263 Our custom prices are sometimes less than our competitions stock vents! We're here 7-5est, instant quotes, no call backs. Call 1-800-685-8263 or e-mail us at volkosupply@yahoo.com
Click a link to visit draftinducers.com for.....
|
|
Looking for Custom Signage or need a Florida Vacation?? Visit our Webfriends
Solar Attic Fan
| Copper
Finials |
Cupolas
|
Metal Ceilings |
Oak Grilles
Vents & Registers |
Copper Roof
Vents & Flashings |
Gutter
Accessories |
Underground Garbage Cans
|
