Welcome to
Volko
Supply ...Online Servicing Home Owners & Contractors
since 1948 A competitively priced full service building supply...Online!
Full service still exists, and here the premium is on service not on
price. Wow!!! I found it at
Volko...... and they made it easy to order.
Protect and extend the life of your flue and
chimney.
The single chimney cap, is used for a chimney that has either one flue or multi flues spaced at leased 6 inches apart.
Easy Installation, just slip
over flue and tighten 4 bolts.
Optional Leg Kit
24 gauge hood & 18 gauge one piece base with built-in
screening
Type 304 Stainless Steel - Animal
proof - Available in custom sizes - Available in copper
3/4" mesh is standard or choose 5/8" spark arrestor
mesh - Superior oval hole mesh prevents creosote build up in corners
Always measure the
outside of the flue tile side to side, never corner to corner.
Single chimney cap sizes
For flue sizes
8"
x 8" smaller size
5 1/2" x 5 1/2" to 8 1/2" x 8 1/2"
8"
x 8"
6 1/2" x 6 1/2" to 9" x 9"
8"
x 13" smaller size
5 1/2" x 9 3/4" to 8 1/2" x 12 3/4"
8"
x 13"
6 1/2" x 11" to 9" x 13 1/2"
8"
x 17"
6 1/2" x 16" to 9" x 19"
13"
x 13" smaller size
9 3/4" x 9 3/4" to 12 3/4" x 12 3/4"
13"
x 13"
11" x 11" to 14" x 14"
13"
x 17"
11" x 16" to 14" x 18 1/2"
17"
x 17"
16" x 16" to 18 1/2" x 18 1/2"
LIFETIME WARRANTY
And remember, measure
twice order
once.
If your flue or flues are even or below the crown ( the cement top of most chimneys ) or in poor shape, a "leg kit" can be used for proper installation.
If you are burning wood, a 5/8" spark
arrestor mesh can be used, check your local Code.
Sometimes the most economical solution to a chimney
flue downdraft, wind related puff back or chimney odor problem is a
simple chimney cap.
Chimney Cap Measuring for single flue chimney caps made easy..... Lets climb that ladder once.....
measure "everything" twice.
Always measure a flue side to side,
never corner to corner.
A flue may
be square, rectangular, oval or round. Measure accordingly.
Provide the inner and outer measurement to size
other options such as top sealing dampers.
If the flue is flush, recessed or it's just a
"hole"... measure it's opening in the crown.
A & B Measure to the
OUTER most edge of the chimney's top.
The chimney's cement "crown".
C & D
Measure the span or OUTER most edge of the flue.
E Measure
EVERYTHING
else... the spacing to each edge
of the chimney, etc.
H
Measure the height of the flue.
Flue
Liner -- Usually a high temperature clay (fireclay). A round, square
or rectangular sleeve lining the interior of masonry chimneys. This is the
pathway in which the "smoke" or flue gases pass through to exit into the
atmosphere.
(Some chimney were constructed with no clay liner or metal pipe was used as the
flue pipe.)
**Always measure a flue side to side, never corner to
corner.
Chimney Crown -- Also called
a "wash"... is usually a cement topping around the flues and tapered to the
chimneys sides to shed water.
(Some crowns are tapered more than others and may create a more difficult cap
installation.)
We do not need to have a
"sale" to give you the best price.
We ask that you call or e-mail us
for prices. Compare our stainless steel and copper chimney caps to
those thin gauge
diamond mesh black caps which may be nothing but painted steel and will
eventually rust.
Shipping is from our location or
direct from the manufacturer,
whichever location is most economical.
No stories. You get your cap
quickly and easily, usually within a few days.
Even customs!
Call 1-800-685-8263 to ask about our chimney caps or e-mail us at
volkosupply@yahoo.com
Volko Chimney Caps...we ain't
just caps.
We can supply you with all
your fireplace and wood stove needs for all manufacturers. We sell
galvanized and stainless steel pipe and fittings, chimney flue liners and high
quality complete double wall chimney systems.
Got a list? Whether it
is 1 cap or a chimney system, e-mail or fax it for a quote.
Looking for chimney caps to cure a downdraft problem??...
8"
x 8" smaller size
